| CAD | 0 |
| CHF | 0 |
| EUR | 0 |
| GBP | 0 |
| USD | 0 |
| Nominal Diameter |
Nominal Crossection Area |
Unit Weight |
||
|
d mm |
Tolerance (mm) |
An mm2 |
Requirementb Kg/m |
Weight Tolerancec % |
|
6 |
± 0,236 |
28,3 |
0,222 |
±8 |
|
8 |
±0,318 |
50,3 |
0,395 |
±8 |
2 - Tensile Strength
The Tensile Strength Test must be accordance with the Procedure 8.1 of Quality Management System.
The product must be qualified for Tensile Strength Requirements stated in Table 5.3 – Bending Properties
After testing, the sample steel bar must not be broken but cracking can be visual and acceptable.|
Grade/Catagories |
Required value of uper Yield Point ReH
MPa |
Require value of |
Bending Properties |
||
|
Rm
MPa |
Required value of Rm/ReH |
Required value of Elongation % |
|||
|
Min |
Min |
Min |
A5 Min |
Agt Min |
|
|
CB300-T |
300 |
440 |
1,46 |
16 |
2 |
| Mr Loc (Imp.&Exp.) Tienlocimex@thepdana-y.com (+84) 511 3841966 |
|
| Mrs Ha (Sales) (+84) 511 3841000 |
|
| Mr Thien (Material) thiendny@thepdana-y.com (+84) 511 3841967 |
DANA-Y STEEL JOINT STOCK COMPANY
+ Address: Road No.11B, Thanh Vinh Industrial Zone, Hoa Khanh Bac Ward, Lien Chieu District, Danang City
+ Tel: 0511 3841000 - 3841966 - Fax: 0511 3730718- 3732508
+ Email: dny@thepdana-y.com - http://www.thepdana-y.com
